Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Warnings
Use the correct tool and accessories for your
application. The correct tool will do the job better
and safer at the rate for which it was designed.
Use of the tool for operations different from those
intended can result in a hazardous situation.
Before operating this tool, read and understand:
• This operator's manual
• The instructions for any other equipment or
material used with this tool
• Markings on the tool
• Required work site safety procedures
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE.
• Do not lock foot switch in ON position. The
operator should always be in control of the tool
to decrease the risk of injury from uncontrolled
movement of the tool.
• Maintain communication between operators.
Loss of communication increases the risk of injury
and damage to the tool and cable.
• Do not use Pull Connect in Endpoint Mode outside
the immediate area of operation. One operator
should be located at each endpoint to monitor the
pull and control the foot switches to reduce the risk
of injury.
• Keep proper footing and balance at all times.
This enables better control of the power tool in
unexpected situations.
• Stay alert, watch what you are doing and use
common sense when operating a puller or feeder.
Do not use this equipment while you are tired or
under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
• Do not let familiarity gained from frequent use of
these tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
• Use the tool in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the tool for
operations different from those intended could result
in a hazardous situation.
• Do not place Pull Connect on ground. Pull Connect
could be damaged and be a tripping hazard.
• Do not carry or unplug the foot switch or Pull
Connect by the cord. Continued abuse can lead to
damage to the cords. Damaged cords increase the
risk of electric shock.
• Do not use Pull Connect if wet. Moisture near
electronics increases the risk of injury and tool
damage from a short circuit.
4
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery surfaces do
not allow for safe handling and control of the tool
in unexpected situations increasing the risk of injury
and tool damage.
• Changes or modifications not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment.
Greenlee Contact Information
If you have any questions or need to purchase parts/
accessories for this Greenlee product: Contact your
local Greenlee distributor or Greenlee's Customer
Service Center.
Additional copies of this manual are available at
www.greenlee.com
Greenlee Customer Service
USA: 1-800-435-0786 | Canada: 800-435-0786
International: 1-815-397-7070
GRNCustomerService@emerson.com
Shipping address:
Greenlee Factory Service Center
4411 Boeing Dr., Rockford, IL 61109
© 2024 Greenlee Tools, Inc.
Pull Connect
52094539 REV 03
Publicidad
