ID
BUTTON
Power
1
Button
3 Mode
2
Select
Buttons
3 Radio
3
Channel
Buttons
Stop
4
Button
8
TABLE 1: BUTTON & LED GUIDE
ACTION
Press and Hold 4 sec.
to turn ON
Power Status LED
Operating Mode LEDs
Press and Hold 2 sec.
to turn OFF
Feeder Mode LED
Press Mode Select
Button next to Feeder
Repeater Mode LED
Icon
Radio Channel
Puller Mode LED
Press Mode Select
Button next to Puller
Repeater Mode LED
Icon
Radio Channel
Repeater Mode LED
Press Mode Select
Button next to
Feeder/Puller Mode LEDs
Repeater Icon
Radio Channel
Press 1, 2, or 3. Must
be the same as other
Radio Channel
units in system.
Press to Stop Pull.
Stop Signal LEDs
Press and hold until
flashing Stop Signal
Stop Signal LEDs
LEDs turn OFF.
Press after start up
sequence and before
Wireless LED
selecting operating
mode.
© 2024 Greenlee Tools, Inc.
LEDs
BEHAVIOR & COLOR
All LEDs turn ON then OFF
except Power Status, Battery
ALL
Level & Operating Mode LEDs
stay ON.
Solid
GREEN
Flashing
3 Flashing White
ALL
OFF
Feeder is Solid White and the
others are OFF
OFF
All are Flashing
LEDs
Puller LED is Solid White and
the others are OFF
OFF
All are Flashing
LEDs
Solid White
Alternating White
All are Flashing
LEDs
Selected button LED is Solid
LEDs
GREEN
the others are OFF
Flashing
Solid
RED
OFF
Flashing
BLUE
Solid
BLUE
Pull Connect
MEANING
Start Up Sequence
Unit is ON
RED
See Troubleshooting
This unit is waiting for the operator to
select a mode.
Unit is OFF
This unit is set to Feeder Mode.
GREEN
Operator can select a radio channel.
This unit is set to Puller Mode.
GREEN
Operator can select a radio channel.
This unit is set to Repeater Mode.
GREEN
Operator can select a radio channel.
The radio is broadcasting on this channel.
RED
This unit is broadcasting a STOP signal.
Another unit is broadcasting a STOP signal.
The STOP command can only be cleared
on the original unit.
command is cleared. Operators
STOP
must step off then back on to foot
switch to resume pull.
Connection with Greenlee Link app
possible.
Connected with Greenlee Link app.
52094539 REV 03