Greenlee Pull Connect Manual De Instrucciones página 9

LED ID LED
General Status
LEDs
LED ID ICON
Feeder Endpoint
LED
Puller Endpoint LED
Signal Strength
LEDs
Wireless LED
Battery LEDs
52094539 REV 03
TABLE 2: GENERAL STATUS LED GUIDE
BEHAVIOR & COLOR
Flashing GREEN
Rotating GREEN
Flashing RED
Solid RED
OFF
TABLE 3: ICON & LED GUIDE
BEHAVIOR & COLOR
OFF
Solid GREEN
Flashing GREEN
OFF
Solid GREEN
Flashing GREEN
GREEN LEDs Sweep Back and Forth
1 to 5 LEDs Solid GREEN
Switching Between Different Number of
GREEN LEDs
Flashing BLUE
Solid BLUE
1-3 Segments are Solid GREEN
Bottom Segment is Rapidly Flashing
GREEN
One or More Segments are Slowly
Flashing GREEN
© 2024 Greenlee Tools, Inc.
MEANING
The Pull Connect is connected to the other endpoint and ready to operate.
Equipment is not active.
Both endpoint foot switches are depressed and equipment is in motion.
A STOP signal is broadcasting from this unit.
All equipment is stopped in system.
A STOP signal is active on another unit in the system.
All equipment is stopped in system.
No active connections.
MEANING
The feeding endpoint foot switch is NOT depressed.
The feeding-endpoint foot switch is depressed.
A Pull Connect, on the same channel, is issuing a STOP command.
The puller endpoint foot switch is NOT depressed.
The puller endpoint foot switch is depressed.
A Pull Connect, on the same channel, is issuing a STOP command.
This Pull Connect is searching for compatible signals on the selected
channel.
Shows the connection strength to the other feeder/puller endpoint.
This Pull Connect is in Repeater Mode and shows the connection strength
of the indicated Feeder or Puller endpoint.
Connection to Greenlee Link app available.
Connected to Greenlee Link app.
Shows the battery charge level.
Battery is low, charge this Pull Connect.
Pull Connect is charging.
Pull Connect
9