VITO VICS550 Manual De Instrucciones página 29

Question/Problem - Cause
Causa
The motor does not start:
• The power cord is disconnected or damaged;
• "ON/OFF" switch electrical contacts are not in good
condition or it does not work;
The motor makes
intermittently or runs slowly:
• "ON/OFF" switch electrical contacts are damaged;
• Mechanical parts are blocked;
• The hedge trimmer is running over excessive
pressure, overloaded motor;
Body overheats:
• Overloaded machine;
• Poor assembly of the housing or pieces inside the
hedge trimmer;
an abnormal sound,
Solution
• Plug in or repair the power cord;
• Repair or replace the switch;
starts
• Repair or replace switch;
• Inspect the mechanical parts;
• Reduce the working pressure;
• Reduce the working pressure;
• Check if there is any blockage;