Descargar Imprimir esta página

Whirlpool W7 OM4 4BS1 H Guia Rápido página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

END TIME (START DELAY)
In many functions, once you have set a cooking time
you can delay starting the function by programming its
end time. The display shows the end time while the
icon flashes.
END TIME
Press
or
to set the time you want cooking to end,
then press
to confirm and activate the function. Place
the food in the oven and close the door: The function
will start automatically after the period of time that has
been calculated in order for cooking to finish at the
time you have set.
Please note: Programming a delayed cooking start time will
disable the oven preheating phase: The oven will reach the
temperature your require gradually, meaning that cooking
times will be slightly longer than those listed in the cooking
table. During the waiting time, you can press
the programmed end time or press
settings. By pressing
, in order to visualize information, it is
possible to switch between end time and duration.
. 6
SENSE
th
These functions automatically select the best cooking
mode, temperature and duration to cook, roast or bake
all the dishes available.
Furthermore, thanks to a special sensor able to recognize
the moisture content of the food, some of the 6
functions allow you to achieve optimal cooking for any
kind of food without any setting: the sensor will stop the
cooking at the perfect time. During the last few minutes
of cooking only, a countdown will appear on the display,
indicating the remaining cooking time.
Do not open the door when cooking with the sensor:
If opened, the sensor will be deactivated. Cooking can
be continued by using the traditional (manual) mode.
Close the door and then press
In recipes which don't use the sensor, when required,
you will simply indicate the characteristic of food to
obtain an optimal result.
WEIGHT / HEIGHT (ROUND-TRAY-LAYERS)
KILOGRAMS
To set the function correctly, follow the indications on
the display, when prompted, and press
the required value then press
DONENESS / BROWNING
In some 6
Sense functions it is possible to adjust the
th
doneness level.
DONENESS
When prompted, press
or
to amend
to change other
Sense
th
to continue cooking.
or
to set
to confirm.
or
to select the desired
level between rare (-1) and well done (+1). Press
to confirm and start the function.
In the same way, where allowed, in some 6
functions, it's possible to adjust the browning level
between low (-1) and high (+1).
3. START THE FUNCTION
At any time, if the default values are those desired or
once you have applied the settings you require, press
to activate the function.
During the delay phase, by pressing
skip this phase, starting immediately the function.
Please note: Once a function has been selected, the display
will recommend the most suitable level for each function.
At any time you can stop the function that has been activated
by pressing
.
If the oven is hot and the function requires a specific
maximum temperature, a message will shown on the
display. Press
to return to previous screen and select
a different function or wait for a complete cooling.
4. PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that the
preheating phase has been activated.
PREHEATING
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature, requiring to "ADD FOOD".
At this point, open the door, place the food in the oven,
close the door and start cooking.
Please note: Placing the food in the oven before preheating has
finished may have an adverse effect on the final cooking result.
Opening the door during the preheating phase will stop pause it.
The cooking time does not include a preheating phase.
You can always change the temperature you want the
oven to reach using
5. PAUSE COOKING / TURN OR CHECK FOOD
Some 6
Sense functions will require the food to be
th
turned during cooking.
TURN FOOD
An audible signal will sound and the display shows
the action to be done. Open the door, do the action
prompted by the display and close the door, then
resume.
In the same way, at 10% of time before the end of
cooking, the oven prompts you to check the food.
CHECK ON FOOD
An audible signal will sound and the display shows the
action to be done. Check the food, close the door and
Sense
th
the oven will
or
.
EN
or
5

Publicidad

loading