Zendure Hub 2000 Manual Del Usuario página 17

Cable Connection For SuperBase V
Cable Connection For Satellite Batteryr
MC4 Y connector 1-to-2
Connect AB1000 or AB2000 or SuperBase V or Satellite Battery to Hub 2000 with
1
the battery cable,The terminals of battery cable can be self-locking, when you hear
a click, you have inserted the battery cable well.（Need to tighten the screws of
connector between the connection with SBV or Satellite Battery）
Connect Hub 2000 to Microinverter, first connect the "1 to 2 MC4 connector" to Hub
2
2000,th en connect to the Microinverter with.
Microinverter cable and another 2 MC4 expand cables.
3
Connect the Microinverter to the home socket with your original cable Connect the
4
solar panel to Hub 2000.
Tips:
• You must connect AB1000 or AB2000 or SuperBase V or Satellite Battery first and then
connect the solar panels.
• After completing the connection, please turn on SolarFlow
1) If battery is AB1000 or AB2000 , then press the IOT button for 2 seconds to turn on .
2) If battery is SuperBase V or Satellite Battery , then press the power button for 1
seconds to turn on the Battery , open the App , press and hold the IOT button of battery
for 3 seconds to finish pairing , finally , turn on the Parallel Switch to provide power to
the Hub 2000 .
MC4 Y connector 1-to-2
4
1
4
1
3
Home Socket
2
The arrow on the battery
cable is in the front.
3
Home Socket
2
The arrow on the battery
cable is in the front.
EN
15