EN
5.3.8 Download the Zendure app
The Zendure App gives users the ability to allocate the power to AB1000
or AB2000 or SuperBase V or Satellite Battery and home grid and monitor
power generation,the power to Microinverter can be set in a range of 100-
1200W.
Read the Zendure App user guide and access the download link here:
https://zendure.com/pages/download-center.
* Add device and Update to the latest firmware version
Using the device for the first time, you need to update the firmware via
the Zendure App.More information ,please check the Zendure App user
guide.
* Set the power to the Microinverter
The maximum solar input power of SolarFlow system is 800W, you can set
the power to Microinverter, and the excess power will be automatic stored
in the battery.For example:
If the total solar input is 800W ,you set 200W to Microinverter, and then
there will be 600W input AB1000 or AB2000 or SuperBase V or Satellite
Battery.
Solar Input
Tips:
• It takes a period of time for the system to grid connection, and it takes
about 20 minutes to synchronize data to Zendure App, so after the
installation, please wait 20 minutes before going to the APP settings.
• It is recommended that you as much as possible store in the battery
during the day except for basic power consumption.The way to know the
basic power consumption as follow:
1. Calculated the device consumption you always run during the day or 24
hours a day, such as refrigerators, routers and standby devices.
2. Go to the meter box right before you go to bed, write down your current
meter reading and the time. As soon as you get up, you write down
the meter reading and the time. You can calculate your base load from
consumption and elapsed time.
3. You can use a measuring socket that you plug between the socket and
the power consumer. To calculate the base load, you collect the wattage
consumed from all the devices that are constantly running (including
standby) and add up the values.
16
Privacy Policy
By using Zendure Products, Applications and Services, you
consent to the Zendure Terms of Use and Privacy Policy,
which you can access via the "About" section of the "User"
page in the Zendure App
To AB1000 or AB2000 or
SuperBase V or Satellite
Battery
To Microinverter