Brudden BS-500 Manual De Instrucciones página 56

Check the maintenance of the hoses. Hoses must be in usable condition before being connected to the
pump.
Cold engine start
Attention! Do not start the equipment's motor if the pump has problems.
Attention! Do not start the engine if the equipment is incomplete.
Attention! Do not use the equipment for purposes other than those specified in this manual.
Attention! Running the equipment out of control can cause damage as well as accidents.
Attention! Check the oil level of the pump using the Oil Level Display.
The oil level should be approximately in the middle of the display.
Top up if necessary.
The engine must be started at least 3 meters away from the tank filling location, in open and
ventilated places, without danger of poisoning by exhaust gases.
Throttle components.
56