Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
Engine stops / Without
throttle
Unstable spray
Without spray / small
amount of mist
Without spray
9. STORAGE
Attention! Keep the equipment secure and securely fastened during transport to avoid
damage and accidents.
When you're done spraying
01 - Spray clean water through the nozzle for a few minutes to clean the circuit.
02 - Wipe off the liquid chemical in the machine after use.
03 - Drain all fuel from the tank. To do this, remove all fuel from the tank, activate the pumping system to
exhaust all the fuel in the circuit, start the engine and let it run until it stops.
04 - Open the boom valve to remove pressure from the system.
05 - Clean all external parts of the engine thoroughly.
06 - If there are any loose or damaged parts, repair them before storing the machine.
07 - Store the equipment in a dust-free place.
08 - Keep the equipment in a place free of moisture.
With the engine running
CAUSE
Dirty air filter
Dirty fuel filter
Fuel inlet clogged
Spark plug
Carburettor
Clogged cooling system
Exhaust port / muffler clogged
Clogged or damaged pump valve
Container wrap on pump piston is
worn
Nozzle liquid valve closed (or
partially closed)
Nozzle liquid valve clogged
Clogged nozzle
Defect in the chemical liquid tube
(pipe, wrap, etc.)
Cracked spray hose tubing
Faulty regulator valve
The chemical tube is completely
clogged with dirt
Chemical tank is empty
Faulty pump
SOLUTION
Clean or replace
Clean or replace
Clean
Clean & Adjust/Replace
Adjust
Clean
Clean
Clean or replace
Replace
Open
Clean
Clean
Replace
Replace
Clean or replace
Clean
Fill
Contact an Authorized Service Center
64
Publicidad
