Alpen Optics APEX XP 7x24 LRF Manual De Instrucciones página 11

When the MEASURE button (2) is pressed, the LCD
display will power on and show the circle center ret-
icle, unit of measure (Y or M), LOS angle degree or
HCD measurement, and battery status. The display
will remain active for up to 10 seconds.
The first press will power on and display the scan
mode and unit of measure. Second press will start
scanning.
Power On Press
Display all for an instant
Second Press
US/GB
DE
FR
ES
NL
IT
www.alpenoptics.de
11