Alpen Optics APEX XP 7x24 LRF Manual De Instrucciones página 12

SETTINGS
To change display settings, press the MEASURE but-
ton (2) to power on and press and hold the MODE
button (1) for 3 seconds until you see the screen
below, Fig. 3.
Depress the MODE button (1) and the first setting
menu will be unit of measure, then mode conver-
sions, then quit.
Settings Mode (Fig. 3) Unit of Measure Menu
Y or M
Use the MODE button (1) to change the setting menu
and the MEASURE button (2) to select the options.
When the desired settings have been made, either
navigate to "Quit" with the MODE button (1) and
confirm with the MEASURE button (2) or wait 10
seconds until the display switches off.
LOS or HCD QUIT
www.alpenoptics.de
12