• Storage in a dry, non-humid room
• Sheltered from the sun
• Stock control for more than 2 months (general condition of the device and all the elements constituting it)
• No shaking of the material
• Storage in closed premises and not outside.
4. HARDWARE FEATURES
* Subject to change
5. INSTALLATION AND USE
5.1 Safety instructions
ELECTRICAL DANGER
Risk linked to electric current!
• No contact with heat sources should take place with the electrical cord.
• The cord should not hang over the edge of a table or counter.
• Do not pour water into a device that is operating or still hot.
• The device must be properly connected and comply with current regulations.
WARNING
When operating, the device can reach high temperatures. To avoid burns and accidents, do not use the
device if it is malfunctioning, and do not use spare parts that are not original.
ELECTRICAL DANGER
Risk linked to electric current!
If incorrectly installed, the device may be dangerous and cause injury. Before any installation, check the
electrical network data. Plug in the device only when it complies. The device must be unpacked and checked
completely before connection by a professional.
5.2 Use
WARNING
The installation of the device and maintenance should only be carried out by professionals.
• Do not leave the device running without monitoring it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.
Manual :
- The device must be completely removed from its packaging. All protection must be completely removed.
- Place the appliance upright on a solid, flat surface. Never place the refrigerated display case on a
flammable surface. Place this machine to ensure optimal air circulation. We advise you to keep a minimum
distance of 10 cm from the wall and other objects.
Model
Temperature
Humidity rate (%RH)
Supply voltage
Dimensions
Weight
CCM480L
0-25°C
30%-90%
200W/220V/50Hz
L 700 x D 810 x H 1662 mm
122kg
EN