Publicidad
Idiomas disponibles
Idiomas disponibles
e)
Keep the device in perfect technical condition. Before each use check for general damage, especially
check moving components for cracked parts or elements, and for any other conditions which may
impact the safe operation of the device. If damage is discovered, hand over the device for repair
before use.
f)
Keep the device out of the reach of children.
g)
To ensure the operational integrity of the device, do not remove factory-fitted guards and do not
loosen any screws.
h)
When transporting and handling the device between the warehouse and the destination, observe the
occupational health and safety principles for manual transport operations which apply in the country
where the device will be used.
i)
Avoid situations where the device stops working during use due to excessive loading. This may result
in overheating of the drive elements and damage to the device.
j)
Do not touch articulated parts or accessories unless the device has been disconnected from the power
source.
k)
Do not move, adjust or rotate the device in the course of work.
l)
Do not leave this appliance unattended while it is in use.
m) Clean the device regularly to prevent stubborn grime from accumulating.
n)
Do not work on two workpieces at the same time.
o)
It is forbidden to interfere with the structure of the device in order to change its parameters or
construction.
p)
Keep the device away from sources of fire and heat.
q)
Do not cover the ventilation openings!
r)
NOTE: During operation, some elements of the device become very hot – scalding hazard!
s)
Use protective glasses. When working in a dusty environment, additionally wear a dust mask.
t)
Keep handles dry, clean and free of oil or grease.
ATTENTION! Despite the safe design of the device and its protective features, and despite the use
of additional elements protecting the operator, there is still a slight risk of accident or injury when
using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The machine is designed for woodworking. Precision cutting is possible, allowing the contours of small parts to
be cut out.
The product is intended for home use only.
The user is liable for any damage resulting from unintended use of the device.
EN
Publicidad
