Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Problem
Saw blades break
Motor does not function
Vibration
(NOTE: The saw vibrates slightly
when the motor is running in
normal operation.)
Saw blade swings out., holders
not aligned straight
Problem Cause Remedy
DISPOSING OF USED DEVICES:
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device
recycling and collection point. Check the symbol on the product, instruction manual and packaging. The
plastics used to construct the device can be recycled in accordance with their markings. By choosing to
recycle you are making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
EN
Cause
Tension incorrectly set
Too much load
Incorrect saw blade variety
Workpiece not fed straight
Mains Cable faulty
Motor faulty
Saw incorrectly installed
Unsuitable underlay
The work bench is not screwed
down
The motor is not secured
Holders not aligned
Remedy
Set the correct tension
Feed the workpiece more slowly
Use the correct saw blades
Avoid exerting pressure from the
side
Change faulty parts
Call customer service. Do not
attempt to repair the motor
yourself as this should be carried
out by trained personnel.
Set the correct tension
Change underlay to more suitable
Secure the work bench
Secure the motor
Losen the screws with which the
holders are fastened to the arm.
Align the holders so that they are
perpendicular to each other and
retighten the screws
Publicidad
