Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Fitting the working depth
For setting or reducing the spindle height, turn the handle (serves for height-adjustment of the
cutting knives) in order to reduce or increase the height, as required.
Secure the setting by tightening the clamping screw (7).
For your safety, with most jobs it is urgently recommended to use the cutter head with the smallest
height in relation to the table top.
Attachment parts for table extension:
8 Allen screws M5 x 20
6 Allen screws M5 x 12
8 Washers 5mm, small
6 Washers 5mm, large
8 Hexagonal nuts M5
14 Circlips 5mm
Fitting the table width extensions
The table width extensions enlarge the table surface, thus allowing the handling of larger work pieces
and the execution of special moulding jobs.
Attach the extension table on both sides with 4 Allen screws M5 x 20, 4 washers, 4 circlips and 4
hexagonal nuts M5 each and on the face of the table with 3 Allen screws M5 x 20, 3 washers and 3
circlips each. Align the table and tighten all screws.
Connection of a dust extractor unit to your spindle moulder
The connection facility for an external dust extractor unit or system for the elimination of dust and
chips (not supplied) is provided.
Slide the suction hose of the dust extractor unit onto the suction connection piece at the rear of the
moulding fence. For hoses with a dia. of 100 mm, a conical adapter is found in the packing.
Publicidad
