Installation And Setup; Rear Panel View; Setup The Ups - Phasak 6000VA Manual De Uso

2.1. Rear panel view

PH 9265 (6K) / PH 9270 (10K)
1. RS-232 communication port
4. Share current port (depends on the model)
fan | 8. External maintenance bypass switch port (depends on the model)
circuit breaker | 11. Output receptacles: connect to mission-critical loads
13. Output circuit breaker for receptacles
15. Programmable output terminal: connect to non-critical loads
18. Grounding terminal

2.2. Setup the UPS

Installation and wiring must be performed in accordance with the local electric laws/regulations and execute the following
instructions by professional personnel.
Step 1. Make sure the mains wire and breakers in the building are enough for the rated capacity of UPS to avoid the hazard of
electric shock or fire.
Note: Do not use the wall receptacle as the input power source for the UPS, as its rated current is less than the UPS‟s
maximum input current. Otherwise the receptacle may be burned and destroyed.
Step 2. Switch off the mains switch in the building before installation.
Step 3. Turn off all the connected devices before connecting to the UPS.
Note 1: The cable for 6K/6KL should be able to withstand over 40A current. It is recommended to use 10AWG or thicker
wire for safety and efficiency.
Note 2: The cable for 10K/10KL should be able to withstand over 63A current. It is recommended to use 8AWG or thicker
wire for safety and efficiency.
Note 3: The selections for color of wires should be followed by the local electrical laws and regulations.
Segurança e harmonia
ININTERRUPTA
Battery Pack
| 2. USB communication port
| 5. Parallel port (depends on the model)
| 13. Input/Output terminal
| 19. Battery pack output circuit breaker

2. Installation and setup

Diagrama 2: 6K/10K
Input/Output terminal
| 3. Emergency power off function connector (EPO connector)
| 6. Intelligent slot
| 9. Maintenance bypass switch
| 12. Output circuit breaker for receptacles
| 14. Output terminal: connect to mission-critical loads
| 16. External battery connector
Uninterruptable Power Supply
EN
| 7. Cooling
| 10. Input
| 17. Utility input terminal
47
PH 9360 | PH 9301