Specifications - Phasak 6000VA Manual De Uso

MODEL
CAPACITY *
PHASE
INPUT
Nominal Voltage
Voltage Range
Frequency Range
Power Factor
OUTPUT
Output voltage
AC Voltage Regulation (Batt. Mode)
Frequency Range (Sync Range)
Frequency Range (Batt. Mode)
Current Crest Ratio
Harmonic Distortion
AC Mode to Batt. Mode
Tempo
transfer
Inverter to Bypass
Waveform (Batt. Mode)
EFFICIENCY
AC Mode
ECO Mode
Battery Mode
BATTERY
Battery Type
Number
Standard
Recharge Time
Model
Charging Current
Charging Voltage
Battery Type
Number
Long-Run
Model
Charging Current
Charging Voltage
INDICATORS
LCD Display
ALARM
Battery mode
Low battery
Overload
Fault
PHYSICAL
Dimensions
Standard
D X L X H (mm)
Model
Net Weight (kg)
Dimensions
Long-run
D X L X H (mm)
Model
Net Weight (kg)
ENVIRONMENT
Operation Humidity (non-condensing)
Noise Level
MANAGEMENT
Smart RS-232 or USB
Optional SNMP
*In LV system, only 12V/7Ah x 3 for 1K model and 12V/7Ah x 6 for 2K model are available.
NOTE 1: Derate to 60% of capacity in CVCF mode and 90% when the output voltage is adjusted to 100VAC/200VAC/208VAC.
NOTE 2: If the UPS is installed or used where the altitude is above than 1000m, the output power must be derated one percente per 100m.
Segurança e harmonia
ININTERRUPTA
PH 9360
6000 VA / 4800 W
Single phase with ground
208/220/230/240 VAC
110-300 VAC at 50% load
176-300 VAC at 100 load
46Hz~54Hz or 56Hz~64Hz
208/220/230/240 VAC
46Hz~54 Hz or 56Hz~64 Hz
50Hz ± 0.1Hz or 60Hz ± 0.1Hz
≦ 3 % THD (
linear load
~ 90.5%
~ 88.0%
12V / 7Ah
20
3 hours - 90%
Depending on applications
UPS status, Load level, Battery level, Input/Output voltage, Discharge timer and Fault conditions
Sounding every 4 seconds
Sounding every second
Sounding twice every second
Continuously sounding
UPS: 580 x 438 x 133 [3U]
B.Pack: 580 x 438 x 133 [2U]
UPS: 17 / B.PACK: 57
580 x 438 x 133 [3U]
17
< 55dBA @ 1 meter
Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8, Linux, Unix, and MAC
Power management from SNMP manager and web browser

6. Specifications

10000 VA / 8000 W
≧ 0.99 @ 100% load
± 1%
3:1 (max.)
) / ≦ 6 % THD (
non-linear load )
Zero
Zero
Pure Sinewave
~ 96.0%
2A ± 10% (max.)
273VDC ±1%
18-20
2A ± 10% (max.)
273VDC ±1%
UPS: 668 x 438 x 133 [3U]
B.Pack: 580 x 438 x 133 [3U]
UPS: 20 / B.PACK: 63
668 x 438 x 133 [3U]
< 58dBA @ 1 meter
Uninterruptable Power Supply
EN
PH 9301
~ 91.0%
~ 89.0%
12V / 9Ah
20
4 hours - 90%
20
65
PH 9360 | PH 9301