Milwaukee M12 FUEL 2554-20 Manual Del Operador página 17

EXAMPLE:
00
0 Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
50
49
5
4
3
2
1
(4x)
FIG. PART NO. DESCRIPTION OF PART
1 05-88-1255 M4 x 22mm Pan Hd. ST T-20 Screw
2 28-50-2554 3/8" Gear Case
3 45-88-2554 Front Gear Case Washer
4 44-90-1050 3/8" Friction Ring
5 34-40-1885 O-Ring
6 --------------- 3/8" Anvil
19 34-40-2554 O-Ring
30 06-82-6351 M3 x 16mm Pan Hd. ST T-10 Screw
31 --------------- Belt Clip
32 05-88-1015 M2.5 x 6mm Pan Hd. Phil. Mach. Scr.
33 23-28-0320 Light Pipe
34 45-24-2554 Forward/Reverse Shuttle
35 42-70-0058 Housing Clip
36 --------------- Right Housing Halve - Cover
37 --------------- Left Housing Halve - Support
49 49-16-2554 Rubber Boot (Optional, Accessory)
50 42-55-0300 Zippered Canvas Tool Bag
51 10-20-2553 Warning Label
53 12-20-2554 Service Nameplate
54 14-30-2554 Impacting Assembly
55 44-66-2554 End Cap Assembly
56 14-20-2554 Electronics Assembly
57 16-01-2554 Rotor/Back Cap Assembly
58 42-70-0495 Belt Clip Assembly
59 31-44-2554 Housing Assembly
60 42-06-2554 3/8" Friction Ring Anvil Assembly
63 --------------- O-Ring
SERVICE PARTS LIST
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
M12™ FUEL™ 3/8" Impact Wrench w/ Friction Ring
2554-20
CATALOG NO.
53
30
(5x)
59 30 33 35 36
37 51 53
36
54
6
63
4 5
60
6 63
NO. REQ.
(4)
(1)
(1)
(1)
(1)
(1)
(1)
(9)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
STARTING
J61A
SERIAL NO.
57
56
51
55
19
19
34
FIG. LUBRICATION
(Type 'J' Grease, No. 49-08-4220):
When servicing, remove 90-95% of the existing grease
prior to installing Type 'J'. Original grease maybe similar
in color but not compatible with 'J'.
2 Coat anvil opening in the front of the gear case with grease.
3 Coat gear case washer with grease.
6 Lightly coat round shaft surface of anvil with grease. Place a
dab of grease in cavity at rear of anvil.
54 Lightly coat the inside gear teeth of ring gear and the gear
teeth of the planet gears of impacting assembly with grease.
57 Coat pinion of rotor/back cap assembly with grease.
SCREW TORQUE SPECIFICATIONS
FIG. PART NO. WHERE USED
1 05-88-1255 Front Gear Case
30 06-82-6351 Rotor/Back Cap
30 06-82-6351 Right Housing-Cover
32 05-88-1015 Belt Clip
MILWAUKEE TOOL
13135 W. LISBON RD., BROOKFIELD, WI 53005
BULLETIN NO.
54-26-2570
REVISED BULLETIN
June 2018
WIRING INSTRUCTION
See Pages 2 & 3
33
35
SEAT TORQUE
(KG/CM) (IN/LBS)
14-17
6-8
9-11
5-9
www.milwaukeetool.com
l
DATE
30
(4x)
37
31
31
58
32
32
12-14
5-6
7-9
4-7
Drwg. 1