Kemper MaxiFil Clean Instrucciones De Servicio página 76

5 Assembly
Instructions for safe installation of the product
NOTE
The operating company of the product may only assign specialists to
carry out independent assembly.
• At least two people are needed to assemble the product.
• It must be ensured that the installation location and point of use of
the product provides sufficient load-bearing capacity and good
stability.
DANGER
Falling or tipping parts may cause life-threatening injuries!
Tipping or falling loads lead to severe to fatal injuries.
• Observe the total weight, attachment points and centre of gravity of
the load.
• Observe the transport instructions and symbols on the transported
goods.
WARNING
Incorrect connections may cause serious injuries!
Please note the necessary safeguards and only have the product
connected by trained specialists.
NOTE
The operating company of the product may only commission persons to
independently assemble the product if they are well-versed in this task.
Two people are needed to assemble the product.
Ensure that the welding current return line between the workpiece and
the welding machine has a low resistance and that connections between
the workpiece and the product are avoided so that the welding current
cannot flow back to the welding machine via the product's protective
conductor.
1502030-00 - 76 -
EN