Kemper MaxiFil Clean Instrucciones De Servicio página 88

NOTE
Products with IFA certification according to requirements for W3/IFA
certified welding fume separation class. (See "Technical data" chapter)
The IFA approval becomes void if:
• The product is used other than as intended or is subject to
constructive modifications.
• Non-original spare parts, in accordance with the spare parts list, are
used.
• Only original replacement filters, because they guarantee the necessary
filter efficiency and are matched to the product and its performance
characteristics.
• Switch the product off using the on/off switch.
• Secure the product against unintentional switching on. If available, pull
out the mains plug or secure the main switch in the 0 position with a
padlock.
• Disconnect the pressure supply, if present, and let the compressed air
present in the product flow out via the condensate drain valve.
7.2.2 Changing filters
WARNING
Work on the compressed air vessel and on the compressed air lines and
components may only be performed by persons with expertise in
pneumatics.
The pneumatic system must be isolated and depressurised prior to
maintenance and repair work on the external compressed air supply, see
also the Safety chapter
Perform the filter change as follows:
1502030-00 - 88 -
EN