Reboots ONE Instrucciones De Uso página 20

BEFORE YOUR USE
CONNECT AIR HOSES
Connect the set of hoses to the
cuffs, starting with the dark gray
connector,
and then plugging the other gray
connectors onto the appropriate
counterparts.
NOTE: We recommend that you do
not detach the connectors
afterward.
DEVICE SET-UP
Ensure that the device is securely placed.
Also make sure that the device is free
standing and not covered by a blanket, or
similar. Do not use the device in damp rooms
or those with high humidity, such as in
saunas or bathrooms.
20
TIGHTENING LEG CUFFS
To prevent contamination, we recommend wearing
leggings or sweatpants when using the device.
Empty your pockets before application!
NOTE: In general, the boots should be pulled up as
far as possible. Only the tips of the toes (not the
toes!) should stick out at the end. This way you can
ensure that your entire legs benefit optimally from
the recovery application.
The zippers on the cuffs must be completely closed
to avoid the cuffs from suddenly splitting open and
causing possible damage.
After plugging it into the power plug, putting on the
cuffs, and tightening the zipper, the Reboots
application controls on the control unit can be
adjusted. You will find more information on the
following pages.
NOTE: Always
make sure that the
hoses are not
kinked, and that
you are not sitting
on the hoses.