Pool Technologie Dosipool Ampero Instrucciones De Uso página 30

2.9. Chlorine dosing
2.9.1. Adding electrolyte gel
The electrolyte gel relates to the amperometric probe (see the manual provided with the probe).
Menu Sub-menu
CL gel Gel adding
2.9.2. Calibrating the free chlorine rate measurement
Menu
Dosing
From 0.1 to 5 ppm, in increments of 0.1 ppm
Cl calibration
2.9.3. Specification of the chlorine concentration
Menu
Dosing
Chlorine rate XX°
2.9.4. Selection of the chlorine dosing mode
Menu
Dosing
Mode XXXX
Depending on the settings made, some menus may not appear.
2.9.5. Setting the hourly chlorine dosage
Menu Sub-menu
Recommended
dose 40 mL/h
Dosing
Dose adjustment
Dose adjustment
XXX mL/h
2.9.6. Setting the chlorine setpoint
Menu
Dosing
CL setpoint X.X
2.9.7. Real-time display of the cumulative volume of chlorine injected that day
Menu
Dosing
Total Dose Day
Possible settings
Possible settings
From 5 to 48°, in increments of 1°
Possible settings
CL
MANU
OFF
Specific instructions
To move to the next sub-
menu, press the OK key.
Possible settings
From 0.1 to 5 ppm, in increments of 0.1 ppm
Specific instructions
Press the OK button twice:
The message «
gel adding confirmed!
Chlorine dosing by amperometric control and according
to the CL setpoint
Hourly chlorine dosing
Switching off the chlorine dosing
From 10 to 990 mL/h, in increments
-
Access to information
Press the OK key.
» is displayed.
Default setting
Current measurement
Default setting
36°
Meaning
Possible settings
None (read-only display)
of 10 mL/h
Default setting
1 ppm
Default
setting
CL
Default
setting
-
40 mL/h
12