Descargar Imprimir esta página

universalblue UAP1907-23 Manual De Instrucciones página 31

Publicidad

Idiomas disponibles

Idiomas disponibles

methods
other
ones recommended by the
manufacturer.
Do not roll the power cord
around the appliance.
The
appliance
be
switched
disconnected from the mains
before cleaning or relocating
it. Be careful when you
relocate it and move it slowly.
If you are going to use a hot
air exhaust, make sure the
connections are correct to
ensure a proper performance.
The tube must not be blocked
or twisted.
Do not use external timers or
remote controlling systems,
this appliance has not been
designed for such devices.
Electric shock hazard:
Pay special attention to
the
indications.
If the power cord is damaged
it
must
be
a
qualified
technician, do not attempt to
repair it yourself, it could be
dangerous.
Do
not
manipulate
appliance if your hands are
wet.
All local and national rules and
regulations apply concerning
the
connections
than
the
must
off
and
following
repaired
by
professional
the
and
the
wiring of the appliance. If
you are not familiar with
these regulations, get some
information about it.
Avoid disposing of the power
cord. Do not twist it, change it
or submerge it in any liquid
Do not leave the power cord
near any sharp edges or hot
surfaces.
Fire hazard: Pay special
attention
following indications.
You
must
the
national
concerning gas.
If
your
appliance
producing
or
noises,
immediately from the power
source.
The power cord must be
earthed.
If the power cord is damaged
you must disconnect the
appliance from the mains and
stop using it until a qualified
technician repairs it.
The
refrigeration
must not be perforated, it
is flammable and probably
odourless.
must be installed, used and
kept in a room with some
space (check the "Danger"
sticker on the product)
to
comply
with
regulations
starts
strange
smells
disconnect
circuit
The
appliance
EN
the
it
31

Publicidad

loading