Descargar Imprimir esta página

universalblue UAP1907-23 Manual De Instrucciones página 37

Publicidad

Idiomas disponibles

Idiomas disponibles

you must add a schedule with the action
"ON" and pick a power-on time, and add a
schedule with the action "OFF" and pick a
power-off time
For example, if you want the device to turn
on Mondays, Wednesdays and Fridays at
8:00 and to turn off at 10:00, you would have
to follow this sequence (see images 34 to 38
on pages 13 and 14):
• Tap on "Add program".
• Pick the time 8:00.
• Tap on "Repeat" to pick the days:
Mondays, Wednesdays and Fridays.
• If you wish you can write comments by
tapping on "Observations".
• Activate or deactivate the execution
notice if you want to receive on your
phone a notice when this program
is activated, by tapping on the green
switch.
• Tap on "Power" to select the function
"ON" (to turn it on).
• Tap on "Add program"
• Pick the time 10:00
• Tap on "Repeat" to pick the days:
Mondays, Wednesdays and Fridays.
• If you wish you can write comments by
tapping on "Observations"
• Activate or deactivate the execution
notice if you want to receive on your
phone a notice when this program
is activated, by tapping on the green
switch.
• Tap on "Power to select the function
"OFF" (to turn it off)
Voice control
You can also voice control your appliance
using Google Assistant and/or Amazon
Alexa.
You will also be able to control the following
functions of your device by voice via Google
Assistant and/or Amazon Alexa:
• Temperature
• Temperature mode
• Temperature unit
• Query ambient temperature
• Speed
• On / Off
REPLACEMENT OF BATTERIES
When the signal is transmitted but the air
conditioner does not give a confirmation
signal, it means that the batteries are dead
and need to be replaced.
• Remove the battery cover and take out
the used batteries by sliding the cover
in the direction of the arrow.
• Replace the batteries with new ones,
paying attention to the "+" and "-" poles.
• Close the rear cover.
TROUBLE SHOOTING
Occasionally you can solve yourself some
failures in your appliance. Check the
Problem-Solution chart included in this
manual. See table 03 on page 16.
Otherwise, please contact our Customer
service.
If you notice any failure you cannot fix
yourself and it´s preventing you from using
the appliance, disconnect it from the power
supply.
If an error code appears on your display,
please refer to table 02 on page 15 and
report it to customer service.
Any repairing intervention or
replacement of electrical cables
must be carried out by a skilled
and
Otherwise it could be very
dangerous.
REPAIR AND SPARE PARTS SERVICE
All original spare parts relevant for
the correct operation of the appliance
according to the regulation concerning
sustainable
design
through our After Sales Service for at
least 10 years from the date the appliance
was introduced in the market within the .
European Economic Area.
competent technician.
will
be
available
EN
37

Publicidad

loading