Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
The room where the appliance
•
is installed must be well
ventilated.
Do not cover the appliance,
•
especially the air inlets and
outlets.
Control the appliance with
•
the buttons on the control
panel
and
controller (if included with
your model), not by plugging
and unplugging the power
cord, this could cause a fire or
accident.
Injury
perform
modification / repair
intervention
appliance,
performed
technician.
Pay special attention: any
•
repair intervention to the
refrigerant circuit must be
performed
technician (do not attempt to
do it yourself at any time).
PRODUCT FEATURES
The package contains the following items,
besides this manual and the product
warranty. See pictures 01 on page 4.
Note: The picture is for reference only. The
content may vary depending on the model.
1. Handle
2. Air inlet (down)
3. Air inlet (up)
32
the
remote
risk:
do
to
this
must
by
a
qualified
by
a
qualified
4. Air outlet louver
5. Control panel
6. Air outlet louver
7. Castors
8. Air inlet grille
9. Drainage nozzle
10.
Exhaust duct assembly
11. Window sealing plate assembly
12. Remote control
You can check the product features in table
01 on page 15.
ASSEMBLY AND INSTALLATION
Before unpacking the product, memorize
the position of each accessory in case you
need to repack it in the future.
Never operate the device without its base
not
or other parts.
any
Operate the device only in an upright
position; any other position could create a
your
dangerous situation.
be
Note: the images are for guidance only and
should be used to support the installation.
Follow the instructions below to assemble
your product:
• Place the appliance in a dry, horizontal
position near the window and maintain
a safety distance of at least 50 cm
around the appliance (see picture 02 on
page 5).
• Screw the drainage tube into the air
outlet behind the panel (counter-
clockwise). See picture 03 on page 5.
• Insert the air release hose into the
window sealing plate, adjust the width
of the window opening so that the
window can be matched to the sealing
plate correctly; the length of the sealing
plate is adjustable; and screw it on. (See
picture 02 on page 4).
Note: The air exhaust duct can stretch up
to 1500mm. It's suggested to stretch it as
short as possible and keep it horizontal.
Publicidad
