Publicidad
Idiomas disponibles
Idiomas disponibles
(Y) (uncushioned part of the stroke) is adjusted by moving
the cushioning cylinder. Use a caliper gage or scale gage
as an adjusting aid.
Make sure to observe safety spacing S!
F
ine Adjustment
To achieve the precise dimension X (1), loosen the screw
2) and rotate the stop pin to the precise dimension (3).
One revolution corresponds to a stroke length adjustment
of 0.5 mm. Ten markings have been applied along the
perimeter of the stop pin, i.e., 0.05 mm per marking. The
fine adjustment range amounts to 10 mm. After fine ad-
justment, tighten the screw (2).
2.4.2 A
dVAnce speed
In order for the advance speed to be adjusted the air sup-
ply lines have to be connected.
Turn regulating valve on braking cylinder to adjust the
working stroke speed. The rapid travel speed (forward
and backward) can be adjusted by means of adjustable
check valves in the pneumatic lines. Please refer to sec-
tion 2.3.3.
2.5 r
Ating dAtA
Max. drilling capacity in steel 600 N/mm
Total stroke
Trust at 6 bar
Stroke speed
Air connection inner diameter
Air consumption per cm stroke
Tool hoder: Collet chuck
Sleeve mount DIN 55058
Running trueness
Maximum speed
Working speed 50Hz 2900min
1:1
4:1
16:1
Working speed 50Hz 1450min
1:1
4:1
16:1
Working speed 60Hz 3500min
1:1
4:1
16:1
Working speed 60Hz 1750min
1:1
4:1
16:1
Type of motor protection
Motor output rating
0.75kW/0.55kW/0.9kW/0.66kW
Motor speed rating 50Hz
System voltage
Weithg
Paint coating
2.6 O
perAting cOnditiOns
Temperature range during operation: +20 to +50°C
Maximum relative air humidity: 90% at +30°C, 65% at
+50°C
Compressed air: 5-7bar
Compressed air for pneumatic according to DIN ISO
8573-1 [5/4/4]
Handle tools with caution; keep tools in clean and
sharp condition and observe the tool manufac-
turer's instructions with regard to the use of cool-
ants and tool holding devices.
Use rotational and advance speeds which are assigned
to the tool and to the material.
Ø 12mm
2
80mm
1470N
10-10000mm/min
4mm
0.15l
ER25
ST28
0.02mm
3500min-
1
-1
0.75kW
2900min
-1
725min
-1
180min
-1
-1
0.55kW
1450min
-1
362min
-1
90min
-1
-1
0.9kW
3500min
-1
875min
-1
218min
-1
-1
0.66kW
1750min
-1
437min
-1
103min
-1
IP 55
-1
-1
2'900min
/1450min
230/400/460V, 50/60Hz
20kg
RAL5012
29
Publicidad
