Publicidad
Idiomas disponibles
Idiomas disponibles
LED Feedback: The (23) Red LED flashes represent a different radio manufacturer for the SWC
interface to detect. For example, if you are installing a JVC radio, the SWC interface will flash
Red (5) times, then stop. Following is the LED Feedback Legend, which indicates the flash count
of the radio manufacturer.
LED Feedback Legend
Flash Count
Radio
1
Eclipse (type 1) †
2
Kenwood ‡
3
Clarion (type 1) †
4
Sony / Dual
5
JVC
6
Pioneer / Jensen
7
Alpine *
8
Visteon
9
Valor
10
Clarion (type 2) †
11
Metra OE
12
Eclipse (type 2) †
STEERING WHEEL CONTROL SETTINGS: LED FEEDBACK
Flash Count
Radio
13
LG
14
Parrot **
15
XITE
16
Philips
17
TBA
18
JBL
19
Insane
20
Magnadyne
21
Boss
22
Axxera
23
Axxerra (type 2)
24
Alpine (type 2)
KEYNOTES
* Note: If the AXDIS-TY3 flashes Red (7) times, and you do not have an Alpine radio
connected to it, that means the AXDIS-TY3 does not detect a radio connected it. Verify that
the 3.5mm jack is connected to the correct steering wheel jack/wire in the radio.
** Note: The AXSWCH-PAR is required (sold separately). Also, the Parrot radio must be
updated to rev. 2.1.4 or higher through www.parrot.com.
† Note: If you have a Clarion radio and the steering wheel controls do not work, change the
radio type to the other Clarion radio type; same for Eclipse. The following section explains
how to do this.
‡ Note: If you have a Kenwood radio and the LED feedback comes back as showing as a JVC
radio, change the radio type to a Kenwood. The following section on
explains how to do this.
Changing Radio Type
Continued on the next page
5
REV. 4/5/24 INSTAXDIS-TY3
Publicidad
