Axxess AXDIS-TY3 Manual De Instrucciones página 7

Remapping
Once the AXDIS-TY3 has been programmed, the button assignment for the steering wheel controls
may be reassigned if so desired. For example, if the Seek-Up button is preferred to be the Mute
button instead. Follow the steps below to remap the steering wheel control buttons .
1. Ensure the AXDIS-TY3 is visible so you can see the LED flashes to confirm button recognition.
Tip: Turning the radio off is recommended.
2. Within the first twenty seconds of turning the ignition on, press and hold the Volume-Up
button on the steering wheel until the LED goes solid.
3. Release the Volume-Up button, the LED will then go out; The Volume-Up button has now
been programmed.
4. Follow the list in the Button Assignment Legend to reference the order in which the steering
wheel control buttons need to be programmed.
Note: If the next function on the list is not on the steering wheel, press the Volume-Up
button for (1) second until the LED comes on to skip that function, and then release the
Volume-Up button. This will tell the AXDIS-TY3 that this function is not available, and it will
move on to the next function.
5. To complete the remapping process, press and hold the Volume-Up button until the LED in
the AXDIS-TY3 goes out.
STEERING WHEEL CONTROL SETTINGS: REMAPPING
Button Assignment Legend
Function # Function
1 Volume-Up
2 Volume-Down
3 Seek-Up/Next
4 Seek-Down/Prev
5 Source/Mode
6 Mute
7 Preset-Up
8 Preset-Down
9 Power
* Not applicable in this application
Note: Some radios may not have these commands. Please refer to the manual provided with the
radio, or contact the radio Manufacturer for specific commands recognized by that particular radio.
Function # Function
10 Band
11 Play/Enter
12 PTT (Push to Talk)
13 On-Hook
14 Off-Hook
15 Fan-Up *
16 Fan-Down *
17 Temp-Up *
18 Temp-Down *
REV. 4/5/24 INSTAXDIS-TY3
7