Publicidad
Idiomas disponibles
Idiomas disponibles
STEERING WHEEL CONTROL SETTINGS: CHANGING RADIO TYPE
Attention! The Axxess Updater App can also be used to program the following (3) sub-sections as
well, pending that the interface has been programmed.
Changing Radio Type
If the LED flashes do not match the radio you have connected, you must manually program the
AXDIS-TY3 to tell it what radio it is connected to.
1. After (3) seconds of turning the key on, press and hold the Volume-Down button on the
steering wheel until the LED in the AXDIS-TY3 goes solid.
2. Release the Volume-Down button; the LED will go out indicating the interface is in Changing
Radio Type mode.
3. Refer to the Radio Legend to know which radio number you would like to have programmed.
4. Press and hold the Volume-Up button until the LED goes solid, and then release. Repeat this
step for the desired radio number you have selected.
5. Once the desired radio number has been selected, press and hold the Volume-Down button
on the steering wheel until the LED goes solid. The LED will remain on for about (3) seconds
while it stores the new radio information.
6. Once the LED goes out, the Changing Radio Type mode will then end. You can now test the
steering control wheel controls.
Note: If at any time the user fails to press any button for a period longer than (10) seconds, this
process will abort.
6
Radio Legend
1. Eclipse (Type 1)
9. Valor
2. Kenwood
10. Clarion (Type 2)
3. Clarion (Type 1)
11. Metra OE
4. Sony/Dual
12. Eclipse (Type 2)
5. JVC
13. LG
6. Pioneer/Jensen
14. Parrot
7. Alpine
15. XITE
8. Visteon
16. Philips
17. TBD
18. JBL
19. Insane
20.Magnadyne
21. Boss
22.Axxera
23. Axxera (Type 2)
Continued on the next page
Publicidad
