SATA SATAjet 1000 B Instrucciones De Servicio página 29

Operating Instructions SATAjet 1000 B (RP/HVLP)
6.3. Personal Protection Equipment
• When using, cleaning or maintaining the spray gun, always wear
approved breathing and eye protection equipment as well as suitable
protective gloves, overalls and safety boots!
• When using the spray gun, noise levels of 85 dB(A) may be exceed-
ed. Wear suitable hearing protection!
• Hazard from hot surfaces
When processing hot materials (temperature exceeding 43 °C; 109.4
°F) always wear corresponding protective clothing.
The painter is not exposed to vibrations while using the spray gun. Repul-
sive forces are minimal.
6.4. Use In Explosive Areas
The spray gun is permitted for use / storage in explosion hazard areas of
ex-zone 1 and 2. The product labelling must be adhered to.
• The following applications and operations lead to the loss
of the explosion protection and are, therefore, prohibited:
• Use of the spray gun in explosive areas belonging to ex-zone 0!
• Do not use solvents and cleaning agents based on halogenated
hydrocarbons! Chemical reaction which may occur when using these
substances may be explosive!
Warning!
Warning! Risk of explosion!
EN
29