Pentair HYPRO PROSTOP-E ISOBUS MODULE SYSTEM Guia De Inicio Rapido página 5

VIRTUAL/UNIVERSAL TERMINAL SETUP
5. Populate the System tab based on your
machines specific equipment and operating
parameters.
Note: Pulses Per Gallon is labeled on the
machine' s flow meter and is critical to system
functionality.
5
3. Select the CH1 Setup soft key and select the
Operation tab. Make sure Enable Channel has a
check mark next to it.
4. Define your nozzle size, target rate, rate step
and application mode.
PROSTOP-E ISOBUS MODULE SYSTEM