Pentair HYPRO PROSTOP-E ISOBUS MODULE SYSTEM Guia De Inicio Rapido página 8

PROSTOP-E DUAL SETUP
2. Select the Operation tab and press the
ProStop-E Dual Setup softkey.
8
1. Press the softkey next to Section Valve Type
and choose ProStop-E Dual.
3. Define the nozzle size for Nozzle A and Nozzle
B.
4. Press the Calculate Switching Points softkey.
This will set the speeds at which the system will
switch from nozzle A, to nozzle B, and nozzle
A+B.
PROSTOP-E ISOBUS MODULE SYSTEM