Publicidad
Idiomas disponibles
Idiomas disponibles
is displayed if the measurement could not be performed
properly. In this case, please refer to the "Troubleshooting"
section.
If necessary, re-attach the cuff after 1 minute.
The device switches off automatically after approx. 30 sec-
onds. The value is saved to the selected or most recently
used user.
Multiple measurement
1. Press
. All display elements are briefly displayed.
2. The start screen welcomes you for selected
. From this start screen you can access all menu items, e.g.
user memory.
3. Multiple measurement can be selected by pressing < or >.
flashes on the display. To start the measurement, confirm with
.
The cuff inflates itself automatically. The measurement starts.
4. The device displays the first measurement cycle for 3 seconds
and then performs a regular measurement that is repeated three
times. In the second and third cycle, a 30-second countdown is
also displayed, indicating the time to wait until the next meas-
urement.
To cancel the measurement, press
5. After the third measurement, the average measurement of sys-
tolic pressure, diastolic pressure and pulse is displayed and in-
dicated with
.
The cuff position control symbol
the entire measurement. If the cuff is too loose,
will be displayed. In such cases, the measurement is can-
celled after approx. 5 seconds and the device switches itself
off.
or for selected
.
is displayed throughout
and
29
is displayed if the measurement could not be performed
properly. In this case, please refer to the "Troubleshooting"
section.
If necessary, re-attach the cuff after 1 minute.
The device switches off automatically after approx. 30 sec-
onds. The value is saved to the selected or most recently
used user.
6.4 Evaluating the results
General information about blood pressure
• Blood pressure is the force with which the bloodstream press-
es against the arterial walls. Arterial blood pressure constantly
changes in the course of a cardiac cycle.
• Blood pressure is always stated in the form of two values:
- The highest pressure is the systolic blood pressure. This
occurs when the heart muscle contracts and blood is
pumped into the blood vessels.
- The lowest pressure is the diastolic blood pressure. This
occurs when the heart muscle has completely relaxed again
and the heart is filling with blood.
• Fluctuations in blood pressure are normal. Even during re-
peat measurements, there may be considerable differences
between the measured values. One-off or irregular measure-
ments therefore do not provide reliable information about the
actual blood pressure. Reliable assessment is only possible
when you perform the measurement regularly under compa-
rable conditions.
Cardiac arrhythmia
The device can identify heart rhythm abnormalities during the
blood pressure measurement. If
urement, this indicates that an irregularity has been detected in
your pulse.
is displayed after the meas-
Publicidad
