Beurer BM 28 Manual De Instrucciones página 27

• _ appears if the measurement has not been performed prop-
erly. Observe the chapter on error messages/trouble shooting
in these instructions for use and repeat the measurement.
• Now select the desired user memory by pressing the memory
button M. If you do not select a user memory, the measure-
ment is stored in the most recently used user memory. The
relevant , , or symbol appears on the display.
• To switch off, press the START/STOP button
to turn off the device, it will switch itself off automatically after
around 30 seconds.
Wait for at least 1 minute before taking another measurement.
6.4 Evaluating the results
General information about blood pressure
• Blood pressure is always stated in the form of two values:
- The highest pressure is the systolic blood pressure. This
occurs when the heart muscle contracts and blood is
pumped into the blood vessels.
- The lowest pressure is the diastolic blood pressure. This
occurs when the heart muscle has completely relaxed again
and the heart is filling with blood.
• Fluctuations in blood pressure are normal. Even during re-
peat measurements, there may be considerable differences
between the measured values. One-off or irregular measure-
ments therefore do not provide reliable information about the
actual blood pressure. Reliable assessment is only possible
when you perform the measurement regularly under compa-
rable conditions.
Cardiac arrhythmia
The device can identify heart rhythm abnormalities during the
blood pressure measurement. If
. If you forget
is displayed after the meas-
27
urement, this indicates that an irregularity has been detected in
your pulse.
Repeat the measurement if
When assessing your blood pressure, only use the results that
have been recorded without any irregularities in your pulse.
Consult your doctor if
determine, through an examination, whether there is an abnor-
mality.
Risk indicator
Measured blood pres-
sure value range
Systolic (in Diastolic
mmHg) (in mmHg)
≥ 180 ≥ 110
160 – 179 100 – 109
140 – 159 90 – 99
130 – 139 85 – 89
120 – 129 80 – 84
< 120 < 80
< 90 < 60
Source:
1
Source:
2
The risk indicator / indicates which category the recorded
6 21
blood pressure values fall into. If the measured values are in two
different categories (e.g. systolic pressure in the "high normal"
range and diastolic pressure in the "normal" range), the risk in-
is displayed.
is displayed frequently. Only they can
Risk
Classification indicator
colour
Stage 3 high blood
Red
pressure (severe)
1
Stage 2 high blood
Orange
pressure (moderate)
1
Stage 1 high blood
Yellow
pressure (mild)
1
High normal Green
1
Normal Green
1
Optimal Green
1
Low blood pressure Orange
2