Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
6.
Put the freezer door on bottom hinge, install the middle hinge, the screws and the screw
hole caps.
middle hinge
(The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor)
7.
Place the door body for the refrigerator compartment on the middle hinge, then install
the upper hinge to the other side of the cabinet, finally connect the terminals
the signal wires at the side of the upper hinge and terminals
and cover the hinge cover and hole cover.
Note: The two terminals
control screen on the door will not display due to the circuit out of power.
screw
and
must be connected, otherwise the display
9
EN
hole cap
,
,
on the other side
for
Publicidad
