Maintenance; Replacing The Battery - IOPI MEDICAL 2.3 Manual Del Usuario

®
IOPI

replacing the Battery

1. Replace the battery if the display shows a low battery icon [LO BAT], the
display is dim, or if the display does not illuminate when the Power button
has been pressed.
2. To replace the battery, slide the battery cover on the back of the IOPI® to its
fully open position.
3. Install a new 9V alkaline non-rechargeable block battery and connect it to
the battery connector, being sure to correctly match the polarity.
4. Slide the battery cover to its fully closed position.
NOTE: Contact your local waste disposal authority for instructions on how to
dispose of used alkaline batteries. In Europe, used batteries should be recycled in
accordance with council directive 2006/66/EC as transposed into national laws.
Do not dispose of in clinic trash.
Phone: +1 (425) 549-0139

Maintenance

800-2301-02 LS3 2014.05
15