Control Buttons - IOPI MEDICAL 2.3 Manual Del Usuario

®
IOPI
#
1
2
3
4
5
6
7
8
9
10
11
12
13
6 6

Control Buttons

Symbol Identity
Lights Mode
Set Maximum
SET MAX
Pressure
Adjust Maximum
Adjust Maximum
Down
Timer Mode
Start Timer
Stop Timer
Timer Reset
Peak Mode
Peak Reset
Power
Pressure In
Type B
Toggles the column of lights On and Off.
The LCD display shows the target pressure
required to illuminate the top (green) light of
the light array. When entering Lights Mode,
the LCD displays the default target pressure
of fifty (50) and one light will be illuminated.
Identifies the buttons for adjusting the target
pressure that corresponds to the top (green)
light of the light array in Lights Mode.
Increases the target pressure corresponding
to the top (green) light of the light array in
Up
Lights Mode.
Decreases the target pressure corresponding
to the top (green) light of the light array in
Lights Mode.
When pressed, the LCD display shows the
elapsed time, in seconds, between pressing
the Start Timer [
buttons.
This button will start the Timer.
This button will stop the Timer.
This button will reset the Timer to zero (0).
Activates a peak-finding function. Displays
the maximum pressure achieved when an
attached bulb is compressed.
This button will reset the peak-finding
function to zero (0).
Toggles the battery power between On
and Off. The IOPI® will turn itself off after
15 minutes without a button push or
pressure response.
Short stainless steel tube that connects to
female end of Connecting Tube.
Patient Isolation:
Type B patient applied part according to
IEC 60601-1.
Description
] and Stop Timer [
www.IOPIMedical.com www.IOPIMedical.com
]