Operating Faults And Their Possible Causes - Pratissoli LK Serie Manual De Uso Y Mantenimiento

Ocultar thumbs Ver también para LK Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 92
15
OPERATING FAULTS AND THEIR
POSSIBLE CAUSES
The pump does not produce any noise upon
start-up:
-
The pump is not primed and is running dry.
-
No suction water.
-
Valves are blocked.
-
The outlet line is closed and does not allow air
present in the pump head to come out.
The pump pulsates irregularly:
-
Air suction.
-
Insufficient supply.
-
Bends, elbow bends, fittings along the suction
line are choking the passage of liquid.
-
The suction filter is dirty or too small.
-
The booster pump, where installed, is supplying
insufficient pressure or flow rate.
-
The pump is not primed for insufficient head or
the outlet is closed during priming.
-
The pump is not primed due to valve jamming.
-
Worn valves.
-
Worn pressure seals.
-
Imperfect functioning of the pressure control
valve.
-
Problems on the transmission.
The pump does not supply the nominal flow rate/
excessive noise:
-
Insufficient supply (see various causes as above).
-
The number of rpms is less than the nominal rate;
-
Excessive leakage of the pressure control valve.
-
Worn valves.
-
Excessive leakage of the pressure seals.
-
Cavitation due to:
1) Improper sizing of suction ducts/undersized
diameters.
2) Insufficient flow rate.
3) High water temperature.
The pressure supplied by the pump is insufficient:
-
Use (nozzle) is or has become higher than the
capacity of the pump.
-
The number of rpms is insufficient.
-
Excessive leakage of the pressure seals.
-
Imperfect functioning of the pressure control
valve.
-
Worn valves.
The pump is overheated:
-
The pump is working in pressure excess or the
number of rpms is higher than the nominal rate.
-
Oil in the pump casing is not at level or is not the
recommended type as detailed in chapter 7 (see
par. 7.6).
-
Joint alignment is incorrect.
-
Excessive pump tilt during operation.
Vibrations and shock to pipes:
-
Air suction.
-
Imperfect functioning of the pressure control
valve.
-
Valve malfunction.
-
Non-uniformity in the transmission motion.
34

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Lk36Lk40Lk45Lk50Lk55Lk60

Tabla de contenido