Descargar Imprimir esta página

Panasonic CQ-DFX972U Manual De Instrucciones página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

fore Reading these Instructions
You can operate this unit by pressing buttons on the main unit and the remote control unit.
E3 These instructions describe buttons that are concerned with operations as follows.
Example: Press [PSET
/\]
or [P-SET v]/[/\] or [ v],
&
[buttons on the main unitj/lremote control unit]
S Some operations can be activated by pressing buttons only on main unit or remote control unit.
Those cases are described in the instructions.
Example: Press [OPEN] on the main unit.
mote
Control Unit Preparation
Battery Installation
© Remove the battery holder.
Pull the battery holder by the position B while pushing
Back
Lithium battery
(included)
position A in the direction indicated by the arrow.
(2) Install the battery on the battery holder.
Set a new battery properly with its
side facing up
as shown in the figure.
^
side
(3) Insert the battery holder.
^^J^^Position B
Push the battery holder back into its original position.
Battery Notes
Remove and dispose of an old battery immediately.
Battery holder
Position A
Battery Information:
o Battery type: Panasonic lithium battery (CR2025) (included)
o Battery life:
Approximately 6 months with normal use (at room temperature)
-.--v
Caution:
® Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire.
Battery leakage may damage the unit.
V___
o
Do not disassemble or short the battery. Do not throw a battery into a fire.
© Keep batteries away from children to avoid the risk of accidents.
© Be careful to observe proper local disposal rules when you dispose of batteries.
Point the remote control unit at the main unit's sensor.
(HD3
DEX97/2U

Publicidad

loading