Publicidad
Idiomas disponibles
Idiomas disponibles
□ Installation Procedures
First complete the electrical connections, and
then check them for correctness. («=> page 58)
The included mounting collar 0 is designed
specially for this unit. Do not use it to attach
any other model.
Power connector^
Mounting tabs
© Mounting bolt (5 mm0)
Insert mounting collar 0 into the dashboard, and
bend the mounting tabs out with a screwdriver.
Fastening the mounting collar
The tabs to be bent vary depending
on the car. Bend them with a screw¬
driver to fasten the mounting collar
© securely in the dashboard.
s~
Dashboard
0 Mounting collar
Note:
oTo securely install the unit, fully
bend a number of the tabs so that
there is no rattling,
o Be sure to fasten the unit securely
when joining it with the mounting
collar ©.
Secure the rear of the unit.
After fixing mounting bolt ® and power connector ©,
fix the rear of the unit to the car body by either
method (a) or (b) shown below.
Insert trim plate ®.
^
After
installation,
recon¬
nect the negative
0
battery
terminal.
(a) Using the rear support strap ©
Fire wall of car
(3) Tapping screw
/
(5 mm0x16 mm)
/
3 mm0
\
0 Hex. nut
^
|
i
(5mm0)
/
Rear support
© Mounting bolt
(5 mm0)
\
© Mounting collar
(b) Using the rubber cushion (option)
Rear support bracket
Rubber cushion (option)
(provided on the car)
© Mounting bolt
x_(5 mm0)
0 Mounting collar
Publicidad
