Twist 'n' Lock — Manual Toilets
Applications
You may install JABSCO Regular and Compact bowl manually
operated marine toilets in both power and sailing craft, either
above or below the waterline, for use on sea, river, lake or canal.
Your installation may discharge the waste either overboard
(provided that your national and local regulations allow this),
or into a treatment system or into an on-board holding tank
(U.S.C.G. Marine Sanitation Devices Type I, II and III).
JABSCO manual toilets are designed specifically
for marine use. Consult Jabsco for advice about
possible non-marine applications.
Optional re-assembly
by installer for left
Features
Design
• Twist 'n' lock action safety handle guards against flooding and
waste backflow by locking the waste outlet valve shut.
• Reversible pump mounting allows re-assembly for left hand
operation by installer.
• Powerful self-priming, double-acting piston pump.
• Strong swirl action for efficient flushing.
• Crevice free contours and skirted base for added cleanliness
and hygiene.
• Contoured handle and conveniently positioned flush control
lever for ease of use.
• Angled pump housing and long stroke for easier pumping.
• Spring assisted top valve closure for easier priming.
• Automatic vacuum breaker operated by flush control lever for
easier bowl emptying.
• Constant 38mm (1-1/2") bore waste path minimises
blockages.
hand operation.
• Aortic joker valve combines full 38mm (1-1/2") bore with
automatic backflow prevention.
• Multi-angle discharge elbow for ease of installation.
• Accessible mounting points for faster installation.
• All fastenings face front or top for superbly simple servicing
without need for special tools.
• Renewable external seal housing for quick, clean replacement
of seal and piston rod guide.
• Positively located gaskets ensure correct re-assembly.
• Dual function base plug combines winter drain point with easy
cleaning access.
Materials
• Baked enamel wooden seat - Luxury thermoset soft close seat
on selected models.
• Hygienic white ceramic bowl for ease of cleaning.
• Pump and base moulded in ABS or polypropylene with
selected parts in acetal resin, fitted with 316 passivated
stainless steel fastenings, brass weights and neoprene seals
and gaskets.
Performance
• Flushing pump self-primes from dry up to 1 metre (3ft) below
the base.
• Waste pump discharges up to 3 metres (9ft) above the base.
Dimensions
• See the Dimensional Drawing.
Installation Instructions
YOUR TOILET is just one part of a system. Correct installation
of the whole system is essential if you want the toilet to perform
properly, operate reliably and safely, and give satisfactory length
of life. The toilet is delivered assembled for right-handed opera-
tion. If you wish, both Regular and Compact Bowl models may be
re-assembled with the pump on the left hand side. The seat and
lid is delivered boxed and unfitted for its protection.
NB: Key numbers, e.g. ('Key 31'), are references to the explod-
ed view diagram.
2