Clatronic AR 820 Instrucciones De Servicio página 71

INSTALLATION
Side view with
screw holes with
T and N markings
Standard
mounting bracket
for radio
Screw
Dashboard or console
REMOVE AND INSTALL FRONT PANEL
Remove Front Panel
1. Press the release button OPEN to flap
the front panal down.
2. Slightly lift the front panel and first pull
the right side, then the left side outward.
Screw
71
Attach the unit to the standard mounting
brackets for the radio. Align the holes on the
bracket with the holes on the unit and tighten
the screws (5x5mm) on both sides.
Note: Outer frame, sleeve and metal strip
are not used in installation method B.
Left side
Front panel
3. Store the front panel in the supplied pro-
tective case.
Protective case
Front panel
Right side