Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
Make sure that the oven has cooled down before
carrying out any maintenance or cleaning.
Do not use steam cleaners.
Wear protective gloves.
EXTERIOR SURFACES
• Clean the surfaces with a damp microfibre cloth.
If they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
• Do not use corrosive or abrasive detergents. If
any of these products inadvertently comes into
contact with the surfaces of the appliance, clean
immediately with a damp microfibre cloth.
INTERIOR SURFACES
• After every use, leave the oven to cool and then
clean it, preferably while it is still warm, to remove
any deposits or stains caused by food residues To
dry any condensation that has formed as a result
of cooking foods with a high water content, let the
oven to cool completely and then wipe it with a
cloth or sponge.
TROUBLESHOOTING
Problem
The oven is not working.
The oven makes noises, even
when it is switched off.
The display shows the letter
"F" followed by a number.
The oven does not heat up.
PRODUCT FICHE
The product fiche with energy data of this
WWW
appliance can be downloaded from Whirlpool
website docs.whirlpool.eu
HOW TO OBTAIN THE USE AND CARE GUIDE
>
Download the Use and Care Guide
WWW
from our website docs.whirlpool.eu (you
can use this QR Code), specifying the
product's commercial code.
> Alternatively, contact our Client After-sales Service.
10
Possible cause
Power cut.
Disconnection from the mains.
Cooling fan active.
Software fault.
When "DEMO" is "On" all commands are active and
menus available but the oven doesn't heat up.
DEMO appears on display every 60 seconds.
Do not use wire wool, abrasive scourers or
abrasive/corrosive cleaning agents, as these could
damage the surfaces of the appliance.
The oven must be disconnected from the mains
before carrying out any kind of maintenance work.
• Activate the "Smart Clean" function for optimum
cleaning of the internal surfaces.
• Clean the glass in the door with a suitable liquid
detergent.
ACCESSORIES
Soak the accessories in a washing-up liquid solution
after use, handling them with oven gloves if they
are still hot. Food residues can be removed using a
washing-up brush or a sponge.
The glass tray
Solution
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
Open the door or hold or wait until the cooling process
has finished.
Contact you nearest Client After-sales Service Centre
and state the number following the letter "F".
Access "DEMO" from "SETTINGS" and select "Off".
CONTACTING OUR AFTER SALES SERVICE
You can find our contact details
in the warranty manual. When
contacting our Client After-sales
Service, please state the codes
provided on your product's
identification plate.
XXX/XXX
XXXXXXXXXXXX
XXXXXXXXXXXX
Publicidad
