SmartSun DOMOTICO Manual De Instrucciones página 32

7.
ADIDITIONAL FUNCTIONS
ELITE-I
These motors are equipped with an electronic limit switch via radio. They are designed to be
controlled via transmitter controls, radio sensors and mobile application. The stop points as well
as the direction of rotation are programmable via the transmitter control.
COMPATIBLE TRANSMITTERS
Radio transmitter
7.0 PRE-PROGRAMMING INSTRUCTIONS
If more than 5 seconds elapse between the various steps of point 7.1, it shall be necessary to
remove the power supply and start again.
In installations with several motors, the motors must be programmed one at a time.
The motor will be able to respond with some actions during programming. Movement/ Beep,
which will be represented as follows:
Movement
On all transmitters, the "P2" button is located on the rear of the transmitter.
32
Via the app by wi-fi
connector module
Beep