SmartSun DOMOTICO Manual De Instrucciones página 42

8.
SETTING ENGINE LIMITS
OF TRAVEL
The motor stroke limits are electronic, the adjustment of these limits is carried out by following
the following steps:
8.1 OPENING TRAVEL END
• Press the "DOWN" button for 2 seconds. The awning will open, press the "STOP" button in the
desired position.
• To fix this position, press the "DOWN" and "STOP" buttons at the same time for 2 seconds.
• The motor will make 2 movements and 3 beeps.
• Set OK.
8.2 END OF CLOSING TRAVEL
• Press the "UP" button for 2 seconds. The awning will close, press the "STOP" button in the
desired position.
• To fix this position, press the "UP" and "STOP" buttons at the same time for 2 seconds.
• The motor will make 2 movements and 3 beeps.
• Set OK.
8.3 INTERMEDIATE LIMIT
Once the awning closing and opening limit switches have been programmed, an intermediate
limit between the two can be programmed.
• Go to the desired position with the "UP" or "DOWN" buttons.
• Press button "P2" on the remote control, wait for the motor to move.
• Press the "STOP" button on the remote for 1 second, wait for the motor to move.
• Press the "STOP" button on the remote for 1 second. The motor will make 2 movements
and 3 beeps.
• Set OK.
• Once this limit has been programmed, it can be activated by pressing the "STOP" button for
2 seconds automatically.
42