ENGLISH
Fire hazard: Pay special
attention
following indications.
If
your
•
producing
or
noises,
immediately from the power
source.
If the power cord is damaged
•
you must disconnect the
appliance from the mains and
stop using it until a qualified
technician repairs it.
The room where the appliance
•
is installed must be well
ventilated.
Do not cover the appliance,
•
especially the air inlets and
outlets.
Control the appliance with
•
the buttons on the control
panel
and
controller (if included with
your model), not by plugging
and unplugging the power
cord, this could cause a fire or
accident.
Injury
perform
modification / repair
intervention
appliance,
performed
technician.
Pay special attention: any
•
repair intervention to the
24
to
appliance
starts
strange
smells
disconnect
the
remote
risk:
do
to
this
must
by
a
qualified
refrigerant circuit must be
performed
the
technician (do not attempt to
do it yourself at any time).
PRODUCT FEATURES
it
The package contains the following items,
besides this manual and the product
warranty. See pictures 01 on page 4-5.
Note: The picture is for reference only. The
content may vary depending on the model.
1.
Control panel.
2.
Front and rear grilles.
3.
Blades.
4.
Water tank.
5.
Wheels.
6.
Wheel support.
7.
Water indicator.
8.
Side grille.
9.
Side filter.
10. Refrigeration chamber. *
11. Cold accumulators *
* Only included in the UCL5004-24 model.
You can check the product features in table
01 on page 8.
ASSEMBLY AND INSTALLATION
Before unpacking the product, memorize
the position of each accessory in case you
need to repack it in the future.
not
Never operate the device without its base
or other parts.
any
Operate the device only in an upright
your
position; any other position could create a
dangerous situation.
be
Note: the images are for guidance only and
should be used to support the installation.
Follow the steps below to mount the device
bracket (see picture 04 on page 7):
by
a
qualified