AL-KO JET 3000 Traducción Del Manual Original De Instrucciones página 13

Product description
2 PRODUCT DESCRIPTION
Various models of pumps are described in these
operating instructions. Identify your model from
the identification plate.
2.1 Product overview (Figures A, B)
No. Component
1 Pump inlet/suction line connection
2 Pump outlet/pressure line connection
3 Motor housing
4 Connection cable
5 On/Off switch
6 Pump base
7 Pump housing
8 Filling screw
9 Pump housing drain screw
10 Pressure line (accessory)
11 Elbow nipple
12 Seal
13 Connecting nipple
14 Seal
15 Filter (accessory)
16 Suction line (accessory)
2.2 Function
The pump draws the conveying medium directly
through the suction holes and feeds it to the
pump outlet. It is operated by means of an on/off
switch.
2.3 INOX (stainless steel)
Pumps with the designation "INOX" are made of
stainless steel. This does not affect their design
or function.
2.4 Safety and protective devices
Thermal protection switch
The pump is fitted with a thermal protection
switch which switches the motor off in the event
of overheating. After a cooling-down phase of ap-
prox. 15 - 20 minutes the pump switches on
again automatically.
467773_j
2.5 Intended use
The pump is intended for private use in house
and garden. It may only be operated within the
framework of the operating limits indicated in the
technical data.
The pump is suitable for:
■
Watering and irrigating
■
Re-pumping and pumping out of vessels (e.g.
swimming pools)
■
Removing water from fountains, rain barrels,
and cisterns.
The pump is suitable only for conveying the fol-
lowing fluids:
■
Clear water, rainwater
■
Water containing chlorine (e.g. swimming
pools)
Any use not in accordance with this designated
use shall be regarded as misuse.
2.6 Possible misuse
The pump must not be operated continuously. It
is not suitable for conveying:
■
Drinking water
■
Salt water
■
Foodstuffs
■
Waste water
■
aggressive media, chemicals
■
corrosive, flammable, explosive or fuming flu-
ids
■
fluids that are hotter than 35 °C
■
water containing sand and abrasive fluids.
3 SAFETY INSTRUCTIONS
DANGER! Danger from contact with live
parts! A defect in the pump or the extension ca-
ble can result in serious injury!
■
Disconnect the connector plug from the
mains immediately.
■
Connect the device via an earth leakage cir-
cuit breaker with a rated leakage current of
< 30 mA.
WARNING! Risk of injury. Defective and
disabled safety and protective devices can result
in serious injury.
■
Have any defective safety and protective de-
vices repaired.
■
Never disable safety and protective devices.
13