4.5
Activate the remote control
4.5.1 Remote control with storage battery
CAUTION
Health damage caused by exploding batteries
> The rated parameters of remote control are: 5VDC 150 mA.
> The output current of the power adapter shall NOT be greater than 2 A.
> Only use the charging cable provided with the product.
> Fully charge the remote control regularly.
> Always remove the power adapter from the power socket when the charging is
completed (LED off).
> Connect the charging
cable to the power
adapter to the remote
control.
> The LED on the remote
control indicates charg-
ing mode (LED red).
20
> Always remove the
power adapter from the
power socket when the
charging is completed
(LED off).