Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
The water temperature is
too high/low.
The Rearwash/Frontwash
stops automatically.
The Rearwash/Frontwash
does not work.
Flushing functions
The auto flush does not
work.
The product does not
flush.
Seat heating
Potential cause
The temperature is set
incorrectly.
The function stops auto-
matically after 2 minutes.
The seat sensor has lost
contact.
The spray nozzle is
blocked.
The seat sensor has lost
contact.
The function is only acti-
vated if a user is sitting on
the product for 6 s or
longer.
The seat sensor has lost
contact.
The function is defective.
The time between two
flushes is too short, it
takes about 25 s until the
water tank is refilled.
The stop valve is closed.
Power or water supply
malfunction.
Solution
> Set the temperature.
[}App] Home – Rear-
wash/Frontwash
Normal condition
> Sit down again.
> Activate the function.
> Clean the spray nozzle.
[}App] Home – Rear-
wash/Frontwash
> Sit down again.
> Activate the function.
Normal condition
> Clean the surface. Sit
down again.
> Contact
help@duravit.com.
Normal condition
> Open the stop valve.
> Flush the product with a
bucket of water (8 l).
> Contact
help@duravit.com.
33
Publicidad
