Descargar Imprimir esta página

AL-KO JET 4000 Traducción Del Manual Original De Instrucciones página 15

Ocultar thumbs Ver también para JET 4000:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
Product description
CAUTION! Denotes a potentially dangerous
situation which can result in minor or moderate
injury if not avoided.
IMPORTANT! Denotes a situation which can
result in material damage if not avoided.
NOTE Special instructions for ease of under-
standing and handling.
2 PRODUCT DESCRIPTION
Various models of pumps are described in these
operating instructions. Identify your model from
the identification plate.
2.1
Scope of supply
The pump is delivered ready for operation with
mains cable and filter wrench.
2.2
Product overview (Figures A - D)
No.
Component
1
Pump inlet/suction line connection
2
Filling screw
3
Pump outlet/pressure line connection
4
Motor housing
5
Connection cable
6
LED display panel
7
Pump base
8
Pump housing
9
Transparent filter cover
10
Filter housing drain screw
10a
Pump housing drain screw
11
Pressure line
13
Elbow nipple
14
Seal
15
Connecting nipple
16
Seal
17
Suction line
18
Filter wrench
19
Filter seal
20
Filter
21
Check valve
467774_j
No.
Component
22
Check valve seal
23
Housing seal
24
Screw-in nipple
25
Seal
26
Measuring unit float
2.3
Function
The pump draws the conveying medium directly
through the suction holes and feeds it to the
pump outlet. It is switched on and off with the
START / STOP button.
2.4
INOX (stainless steel)
Pumps with the designation "INOX" are made of
stainless steel. This does not affect their design
or function.
2.5
Safety and protective devices
Thermal protection switch
The pump is fitted with a thermal protection
switch which switches the motor off in the event
of overheating. After a cooling-down phase of ap-
prox. 15 - 20 minutes the pump switches on
again automatically.
2.6
Intended use
The pump is intended for private use in house
and garden. It may only be operated within the
framework of the operating limits indicated in the
technical data.
The pump is suitable for:
Watering and irrigating
Re-pumping and pumping out of vessels (e.g.
swimming pools)
Removing water from fountains, rain barrels,
and cisterns.
The pump is suitable only for conveying the fol-
lowing fluids:
Clear water, rainwater
Water containing chlorine (e.g. swimming
pools)
Any use not in accordance with this designated
use shall be regarded as misuse.
2.7
Possible misuse
The pump must not be operated continuously. It
is not suitable for conveying:
Drinking water
Salt water
15

Publicidad

loading

Este manual también es adecuado para:

Jet 6000Jet 4600Jet 5000 comfortJet 4000 comfortJet 5000112842 ... Mostrar todo